Display Ike Statistics - HP FlexNetwork MSR Series Command Reference Manual

Field
Local ID
Remote IP
Remote ID type
Remote ID
Authentication-method
Authentication-algorithm
Encryption-algorithm
Life duration(sec)
Remaining key duration(sec)
Exchange-mode
Diffie-Hellman group
NAT traversal
Extend authentication
Assigned IP address

display ike statistics

Use display ike statistics to display IKE statistics.
Syntax
display ike statistics
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display IKE statistics.
<Sysname> display ike statistics
No matching proposal: 0
Invalid ID information: 0
Description
Identifier of the local gateway.
IP address of the remote gateway.
Identifier type of the remote gateway.
Identifier of the remote security gateway.
Authentication method used by the IKE proposal.
Authentication algorithm used by the IKE proposal:
•
MD5—HMAC-MD5 algorithm.
•
SHA1—HMAC-SHA1 algorithm.
•
SHA256—HMAC-SHA256 algorithm.
•
SHA384—HMAC-SHA384 algorithm.
•
SHA512—HMAC-SHA512 algorithm.
Encryption algorithm used by the IKE proposal:
•
3DES-CBC—168-bit 3DES algorithm in CBC mode.
•
AES-CBC-128—128-bit AES algorithm in CBC mode.
•
AES-CBC-192—192-bit AES algorithm in CBC mode.
•
AES-CBC-256—256-bit AES algorithm in CBC mode.
•
DES-CBC—56-bit DES algorithm in CBC mode.
Lifetime of the IKE SA in seconds.
Remaining lifetime of the IKE SA in seconds.
IKE negotiation mode in phase 1: main mode or aggressive mode.
DH group used for key negotiation in IKE phase 1.
Whether a NAT gateway is detected.
Whether extended authentication for clients is enabled.
IP address assigned to the remote peer.
This field is not displayed if no IP address is assigned.
527