HP FlexNetwork MSR Series Command Reference Manual page 791

Predefined user roles
network-admin
network-operator
Parameters
global: Displays statistics about IPv4 connections that match connection limit rules globally.
interface interface-type interface-number: Specifies an interface by its type and number.
slot slot-number: Specifies a card by its slot number. This option is available only when you specify
the global keyword or specify a virtual interface, such as a VLAN interface or tunnel interface.
(Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. This option is available only
when you specify the global keyword or specify a virtual interface, such as a VLAN-interface and
tunnel interface. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. This option is available only when you specify the
global keyword or specify a virtual interface, such as a VLAN interface or tunnel interface.
(Distributed devices in IRF mode.)
destination destination-ip: Specifies a destination by its IP address.
service-port port-number: Specifies a service port by its port number.
source source-ip: Specifies a source by its IP address.
dslite-peer b4-address: Specifies a B4 device on a DS-Lite tunnel. The b4-address argument
specifies the IPv6 address of the B4 device.
count: Displays only the number of limit rule-based statistics sets. Detailed information about the
specified IPv4 connections is not displayed. If you do not specify this keyword, the command
displays detailed information about the specified IPv4 connections that match connection limit rules.
Usage guidelines
The statistics for connections that match connection limit rules include the following information:
•
Connection information, including the source/destination IP address, service port, and transport
layer protocol of connections.
•
Matching connection limit rules.
•
Number of current connections.
•
Whether or not new connections can be created.
To further filter the output statistics, specify the following options in the command:
•
source source-ip.
•
destination destination-ip.
•
service-port port-number.
For example, if you specify the source source-ip and destination destination-ip combination, this
command displays statistics about IPv4 connections that match connection limit rules by source IP
address and destination IP address.
If you do not specify any of the source source-ip, destination destination-ip, and service-port
port-number options, this command displays statistics about all IPv4 connections that match
connection limit rules.
Deleting or modifying an IPv4 connection limit policy will not delete the effective IPv6 connection limit
rule-based statistics sets. An IPv4 connection limit rule-based statistics set will be automatically
deleted after all the IPv6 connections for the set are disconnected.
773