HP FlexNetwork MSR Series Command Reference Manual page 207

network-operator
Parameters
ap ap-name: Specifies an AP by its name, a case-insensitive string of 1 to 64 characters. The string
can contain letters, digits, underscores (_), left brackets ([), right brackets (]), forward slashes (/), and
hyphens (-). If you do not specify an AP, this command displays MAC authentication settings and
statistics for all APs.
radio radio-id: Specifies a radio by its ID. The value range for the radio-id argument varies by device
model. If you do not specify a radio, this command displays MAC authentication information for all
radios on the specified AP.
interface interface-type interface-number: Specifies a port by its type and number. If you do not
specify a port, this command displays both global and port-specific MAC authentication information.
Examples
# Display all MAC authentication settings and statistics.
<Sysname> display mac-authentication
Global MAC authentication parameters:
MAC authentication
User name format
Offline detect period
Quiet period
Server timeout
Authentication domain
Online MAC-auth wired users
Online MAC-auth wireless users : 2
Silent MAC users:
MAC address
0001-0000-0005
0001-0000-0006
GigabitEthernet1/0/1
MAC authentication
Carry User-IP
Authentication domain
Auth-delay timer
Auth-delay period
Re-auth server-unreachable : Logoff
Host mode
Max online users
Authentication attempts
Current online users
MAC address
0001-0000-0000
0001-0000-0001
AP name: AP1
BSSID
Username
Password
VLAN ID
100
12
is link-up
Auth state
Authenticated
Unauthenticated
Radio ID: 1 SSID: wlan_maca_ssid
: Enabled
: MAC address in lowercase(xxxxxxxxxxxx)
: mac
: Not configured
: 300 s
: 60 s
: 100 s
: Not configured, use default domain
: 1
From port
GigabitEthernet1/0/2
GigabitEthernet1/0/4
: Enabled
: Enabled
: Not configured
: Enabled
: 60 s
: Multiple VLAN
: 256
: successful 2, failed 3
: 1
: 1111-1111-1111
189
Port index
21
301