HP FlexNetwork MSR Series Command Reference Manual page 687

Initiator:
Source IP/port: 192.168.1.18/1792
Destination IP/port: 192.168.1.55/2048
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: ICMP(1)
Inbound interface: GigabitEthernet1/0/1
Source security zone: SrcZone
Responder:
Source IP/port: 192.168.1.55/1792
Destination IP/port: 192.168.1.18/0
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: ICMP(1)
Inbound interface: GigabitEthernet1/0/2
Source security zone: DestZone
State: ICMP_REQUEST
Application: OTHER
Start time: 2011-07-29 19:12:33
Initiator->Responder:
Responder->Initiator:
Total sessions found: 2
Table 93 Command output
Field
Initiator
Responder
Source IP/port
Destination IP/port
DS-Lite tunnel peer
VPN-instance/VLAN ID/Inline ID
Protocol
Source security zone
TTL: 55s
1 packets 6048 bytes
0 packets
Description
Session information from initiator to responder.
Session information from responder to initiator.
Source IP address and port number.
Destination IP address and port number.
IP address of the DS-Lite tunnel peer.
If the session is not tunneled by DS-Lite, this field displays a hyphen
(-).
•
VPN-instance—MPLS L3VPN instance where the session is
initiated.
•
VLAN ID—VLAN to which the session belongs during Layer 2
forwarding.
•
Inline ID—Inline to which the session belongs during Layer 2
forwarding.
If no VPN instance, VLAN ID, or Inline ID is specified, a hyphen (-) is
displayed for each field.
Transport layer protocols, including DCCP, ICMP, ICMPv6, Raw IP,
SCTP, TCP, UDP, and UDP-Lite.
Number in parentheses represents the protocol number.
Security zone to which the inbound interface belongs.
If the inbound interface does not belong to any security zone, this field
displays a hyphen (-).
669
0 bytes