Portal { Bas-Ip | Bas-Ipv6 } - HP FlexNetwork MSR Series Command Reference Manual

Views
Portal authentication server view
Predefined user roles
network-admin
Parameters
port-number: Specifies a destination UDP port number the device uses to send unsolicited portal
packets to the portal authentication server. The value range for this argument is 1 to 65534.
Usage guidelines
The specified port must be the port that listens to portal packets on the portal authentication server.
Examples
# Set the destination UDP port number to 50000 for the device to send unsolicited portal packets to
the portal authentication server pts.
<Sysname> system-view
[Sysname] portal server pts
[Sysname-portal-server-pts] port 50000
Related commands
portal server

portal { bas-ip | bas-ipv6 }

Use portal { bas-ip | bas-ipv6 } to configure the BAS-IP or BAS-IPv6 attribute carried in the portal
packets sent to the portal authentication server.
Use undo portal { bas-ip | bas-ipv6 } to delete the BAS-IP or BAS-IPv6 attribute setting.
Syntax
Interface view:
portal { bas-ip ipv4-address | bas-ipv6 ipv6-address }
undo portal { bas-ip | bas-ipv6 }
Service template view:
portal bas-ip ipv4-address
undo portal bas-ip
Default
The BAS-IP attribute of an IPv4 portal reply packet sent to the portal authentication server is the
source IPv4 address of the packet. The BAS-IPv6 attribute of an IPv6 portal reply packet sent to the
portal authentication server is the source IPv6 address of the packet.
The BAS-IP attribute of an IPv4 portal notification packet sent to the portal authentication server is
the IPv4 address of the packet's output interface. The BAS-IPv6 attribute of an IPv6 portal
notification packet sent to the portal authentication server is the IPv6 address of the packet's output
interface.
Views
Interface view
Service template view
Predefined user roles
network-admin
265