Icmpv6-Flood Detect Non-Specific - HP FlexNetwork MSR Series Command Reference Manual

[Sysname] attack-defense policy atk-policy-1
[Sysname-attack-defense-policy-atk-policy-1] icmpv6-flood detect ipv6 2012::12 threshold
2000
Related commands
icmpv6-flood action

icmpv6-flood detect non-specific

icmpv6-flood threshold
icmpv6-flood detect non-specific
Use icmpv6-flood detect non-specific to enable global ICMPv6 flood attack detection.
Use undo icmpv6-flood detect non-specific to disable global ICMPv6 flood attack detection.
Syntax
icmpv6-flood detect non-specific
undo icmpv6-flood detect non-specific
Default
Global ICMPv6 flood attack detection is disabled.
Views
Attack defense policy view
Predefined user roles
network-admin
Usage guidelines
The global ICMPv6 flood attack detection applies to all IPv6 addresses except for those specified by
the icmpv6-flood detect ipv6 command. The global detection uses the global trigger threshold set
by the icmpv6-flood threshold command and global actions specified by the icmpv6-flood action
command.
Examples
# Enable global ICMPv6 flood attack detection in the attack defense policy atk-policy-1.
<Sysname> system-view
[Sysname] attack-defense policy atk-policy-1
[Sysname-attack-defense-policy-atk-policy-1] icmpv6-flood detect non-specific
Related commands
icmpv6-flood action
icmpv6-flood detect ipv6
icmpv6-flood threshold
icmpv6-flood threshold
Use icmpv6-flood threshold to set the global threshold for triggering ICMPv6 flood attack
prevention.
Use undo icmpv6-flood threshold to restore the default.
Syntax
icmpv6-flood threshold threshold-value
900