HP FlexNetwork MSR Series Command Reference Manual page 492

Field
Inbound SPI
Outbound SPI
Status
# Display the number of IPsec tunnels.
<Sysname> display ipsec tunnel count
Total IPsec Tunnel Count: 2
# Display detailed information about all IPsec tunnels.
<Sysname> display ipsec tunnel
Tunnel ID: 0
Status: active
Perfect forward secrecy:
SA's SPI:
outbound: 2000
inbound: 1000
outbound: 4000
inbound: 3000
Tunnel:
local address:
remote address:
Flow:
Tunnel ID: 1
Status: Active
Perfect forward secrecy:
SA's SPI:
outbound: 6000
inbound: 5000
outbound: 8000
inbound: 7000
Tunnel:
local address: 1.2.3.1
remote address: 2.2.2.2
Flow:
as defined in ACL3100
# Display detailed information about IPsec tunnel 1.
<Sysname> display ipsec tunnel tunnel-id 1
Tunnel ID: 1
Status: Active
Perfect forward secrecy:
Description
Valid SPI in the inbound direction of the IPsec tunnel.
If the tunnel uses two security protocols, two SPIs in the inbound direction are
displayed in two lines.
Valid SPI in the outbound direction of the IPsec tunnel.
If the tunnel uses two security protocols, two SPIs in the outbound direction are
displayed in two lines.
Status of the IPsec SA: Active or Standby.
In a VSRP scenario, this field displays either Active or Standby.
In standalone mode, this field always displays Active.
(0x000007d0)
(0x000003e8)
(0x00000fa0)
(0x00000bb8)
(0x00001770)
(0x00001388)
(0x00001f40)
(0x00001b58)
474
[AH]
[AH]
[ESP]
[ESP]
[AH]
[AH]
[ESP]
[ESP]