Dot1X Re-Authenticate - HP FlexNetwork MSR Series Command Reference Manual

Default
The quiet timer is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
When a client fails 802.1X authentication, the device must wait a period of time before it can process
authentication requests from the client. You can use the dot1x timer quiet-period command to set
the quiet timer.
Examples
# Enable the quiet timer and set the quiet timer to 100 seconds.
<Sysname> system-view
[Sysname] dot1x quiet-period
[Sysname] dot1x timer quiet-period 100
Related commands
display dot1x
dot1x timer

dot1x re-authenticate

Use dot1x re-authenticate to enable the periodic online user reauthentication feature.
Use undo dot1x re-authenticate to disable the periodic online user reauthentication feature.
Syntax
dot1x re-authenticate
undo dot1x re-authenticate
Default
The periodic online user reauthentication feature is disabled.
Views
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
Periodic reauthentication enables the access device to periodically authenticate online 802.1X users
on a port. This feature tracks the connection status of online users and updates the authorization
attributes assigned by the server, such as the ACL and VLAN.
You can use the dot1x timer reauth-period command to configure the interval for reauthentication.
Examples
# Enable the 802.1X periodic online user reauthentication feature on GigabitEthernet 1/0/1, and set
the periodic reauthentication interval to 1800 seconds.
<Sysname> system-view
[Sysname] dot1x timer reauth-period 1800
177