Port-Mapping - HP FlexNetwork MSR Series Command Reference Manual

Predefined user roles
network-admin
Usage guidelines
Use this command only if the device memory is insufficient.
This command disables the APR signature database from being rolled back to the last version. Do
not use this command if the device memory is sufficient.
Examples
# Overwrite the current APR signature file for a regular online auto-update operation.
<Sysname> system-view
[Sysname] apr signature auto-update
[Sysname-apr-autoupdate] override-current
Related commands
apr signatures auto-update

port-mapping

Use port-mapping to configure a general port mapping.
Use undo port-mapping to remove a general port mapping.
Syntax
port-mapping application application-name port port-number [ protocol protocol-name ]
undo port-mapping application application-name port port-number [ protocol protocol-name ]
Default
An application protocol is mapped to a well-known port.
Views
System view
Predefined user roles
network-admin
Parameters
application application-name: Specifies an application protocol by its name, a case-insensitive
string of 1 to 63 characters. The names invalid and other are not allowed.
port port-number: Specifies a port by its number, in the range of 0 to 65535.
protocol protocol-name: Specifies a transport layer protocol by its name, including:
•
dccp: Specifies DCCP.
•
sctp: Specifies SCTP.
•
tcp: Specifies TCP.
•
udp: Specifies UDP.
•
udp-lite: Specifies UDP-Lite.
Usage guidelines
If no transport layer protocol is specified, packets that meet the following conditions are recognized
as the specified application protocol's packets:
•
Packets are encapsulated by any transport layer protocol.
•
Packets have the specified port.
698