Portal Enable - HP FlexNetwork MSR Series Command Reference Manual

Parameters
ipv6: Specifies an authentication domain for IPv6 portal users. Do not specify this keyword for IPv4
portal users.
domain-name: Specifies an ISP authentication domain by its name, a case-insensitive string of 1 to
255 characters.
Usage guidelines
You can specify both an IPv4 portal authentication domain and an IPv6 portal authentication domain
on an interface or a service template.
Do not specify the ipv6 keyword for IPv4 portal users.
Examples
# Configure the authentication domain as my-domain for IPv4 portal users on GigabitEthernet 1/0/1.
(Wired application).
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname–GigabitEthernet1/0/1] portal domain my-domain
# Configure the authentication domain as my-domain for IPv4 portal users on service template
service1. (Wireless application.)
<Sysname> system-view
[Sysname] wlan service-template service1
[Sysname-wlan-st-service1] portal domain my-domain
Related commands
display portal

portal enable

Use portal [ ipv6 ] enable to enable portal authentication.
Use undo portal [ ipv6 ] enable to disable portal authentication.
Syntax
Interface view:
portal enable method { direct | layer3 | redhcp }
portal ipv6 enable method { direct | layer3 }
undo portal [ ipv6 ] enable
Service template:
portal enable method direct
undo portal enable
Default
Portal authentication is disabled.
Views
Interface view
Service template
Predefined user roles
network-admin
273