Display Client-Verify Protected Ip - HP FlexNetwork MSR Series Command Reference Manual

count: Displays the number of matching user blacklist entries.
Examples
# Display all user blacklist entries.
<Sysname> display blacklist user
User name
Alex
Bob
Cary
# Display the number of user blacklist entries.
<Sysname> display blacklist user count
Totally 3 blacklist entries.
# Display the user blacklist entry for the user Alex.
<Sysname> display blacklist user Alex
User name
Alex
Table 136 Command output
Field
User name
Type
TTL(sec)
Dropped
Totally 3 blacklist entries
Related commands
blacklist global enable
blacklist user

display client-verify protected ip

Use display client-verify protected ip to display protected IPv4 addresses for client verification.
Syntax
Centralized devices in standalone mode:
display client-verify { dns | http | tcp } protected ip [ ip-address [ vpn vpn-instance-name ] ] [ port
port-number ] [ count ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display client-verify { dns | http | tcp } protected ip [ ip-address [ vpn vpn-instance-name ] ] [ port
port-number ] [ slot slot-number ] [ count ]
Distributed devices in IRF mode:
display client-verify { dns | http | tcp } protected ip [ ip-address [ vpn vpn-instance-name ] ] [ port
port-number ] [ chassis chassis-number slot slot-number ] [ count ]
Views
Any view
Type TTL(sec)
Manual 10
Manual 123
Manual Never
Type TTL(sec)
Manual 10
Description
Username in the user blacklist entry.
Type of the user blacklist entry. Only the manual mode is supported.
Remaining aging time of the user blacklist entry, in seconds. If no aging
time is set for the entry, this field displays Never.
Number of dropped packets sourced from the user.
Total number of user blacklist entries.
865
Dropped
353452
4294967295
14478
Dropped
353452