Address - HP FlexNetwork MSR Series Command Reference Manual

[Sysname-ikev2-profile-profile1] aaa authorization domain abc username test
Related commands
display ikev2 profile

address

Use address to specify the IP address or IP address range of an IKEv2 peer.
Use undo address to restore the default.
Syntax
address { ipv4-address [ mask | mask-length ] | ipv6 ipv6-address [ prefix-length ] }
undo address
Default
The IKEv2 peer's IP address or IP address range is not specified.
Views
IKEv2 peer view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the IPv4 address of the IKEv2 peer.
mask: Specifies the subnet mask of the IPv4 address.
mask-length: Specifies the subnet mask length of the IPv4 address, in the range of 0 to 32.
ipv6 ipv6-address: Specifies the IPv6 address of the IKEv2 peer.
prefix-length: Specifies the prefix length of the IPv6 address, in the range of 0 to 128.
Usage guidelines
Both the initiator and the responder can look up an IKEv2 peer by IP address in IKEv2 negotiation.
The IP addresses of different IKEv2 peers in the same IKEv2 keychain cannot be the same.
Examples
# Create an IKEv2 keychain named key1.
<Sysname> system-view
[Sysname] ikev2 keychain key1
# Create an IKEv2 peer named peer1.
[Sysname-ikev2-keychain-key1] peer peer1
# Specify the IKEv2 peer's IP address 3.3.3.3 with the subnet mask 255.255.255.0.
[Sysname-ikev2-keychain-key1-peer-peer1] address 3.3.3.3 255.255.255.0
Related commands
ikev2 keychain
peer
authentication-method
Use authentication-method to specify the local or remote identity authentication method.
554