Primary Authentication (Radius Scheme View) - HP FlexNetwork MSR Series Command Reference Manual

The shared key configured by using this command takes precedence over the shared key configured
with the key accounting command.
If the specified server resides on an MPLS L3VPN, specify the VPN instance by using the
vpn-instance vpn-instance-name option. The VPN instance specified by this command takes
precedence over the VPN instance specified for the RADIUS scheme.
If you use the primary accounting command to modify or delete the primary accounting server to
which the device is sending a start-accounting request, communication with the primary server times
out. The device tries to communicate with an active server that has the highest priority for
accounting.
If you remove an actively used accounting server, the device no longer sends users' real-time
accounting requests and stop-accounting requests. It does not buffer the stop-accounting requests.
The device can generate incorrect accounting results.
Examples
# In RADIUS scheme radius1, specify the primary accounting server with IP address 10.110.1.2,
UDP port number 1813, and plaintext shared key 123456TESTacct&!.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] primary accounting 10.110.1.2 1813 key simple 123456TESTacct&!
Related commands
display radius scheme
key (RADIUS scheme view)
secondary accounting (RADIUS scheme view)
vpn-instance (RADIUS scheme view)

primary authentication (RADIUS scheme view)

Use primary authentication to specify the primary RADIUS authentication server.
Use undo primary authentication to restore the default.
Syntax
primary authentication { ipv4-address | ipv6 ipv6-address } [ port-number | key { cipher | simple }
string | test-profile profile-name | vpn-instance vpn-instance-name ] *
undo primary authentication
Default
The primary RADIUS authentication server is not specified.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the IPv4 address of the primary RADIUS authentication server.
ipv6 ipv6-address: Specifies the IPv6 address of the primary RADIUS authentication server.
port-number: Specifies the service port number of the primary RADIUS authentication server. The
value range for the UDP port number is 1 to 65535. The default setting is 1812.
95