Network (Ipv4 Address Object Group View) - HP FlexNetwork MSR Series Command Reference Manual

<Sysname> display object-group ip address
IP address object-group obj1: 0 object(in use)
IP address object-group obj2: 5 objects(out of use)
0 network host address 1.1.1.1
10 network host name host
20 network subnet 1.1.1.1 255.255.255.0
30 network range 1.1.1.1 1.1.1.2
40 network group-object obj1
# Display information about IPv6 address object group obj4.
<Sysname> display object-group ipv6 address name obj4
IPv6 address object-group obj4: 5 objects(out of use)
0 network host address 1::1:1
10 network host name host
20 network subnet 1::1:0 112
30 network range 1::1:1 1::1:2
40 network group-object obj3
Table 116 Command output
Field
in use
out of use

network (IPv4 address object group view)

Use network to configure an IPv4 address object.
Use undo network to delete an IPv4 address object.
Syntax
[ object-id ] network { host { address ip-address | name host-name } | subnet ip-address
{ mask-length | mask } | range ip-address1 ip-address2 | group-object object-group-name }
undo network { host { address ip-address | name host-name } | subnet ip-address { mask-length |
mask } | range ip-address1 ip-address2 | group-object object-group-name }
undo object-id
Default
No IPv4 address objects exist.
Views
IPv4 address object group view
Predefined user roles
network-admin
Parameters
object-id: Specifies an object ID in the range of 0 to 4294967294. If you do not specify an object ID,
the system automatically assigns the object a multiple of 10 next to the greatest ID being used. For
example, if the greatest ID is 22, the system automatically assigns 30.
host: Configures an IPv4 address object with the host address or name.
Description
The object group is used by an ACL or object group.
The object group is not used.
783