Priority (Ike Profile View) - HP FlexNetwork MSR Series Command Reference Manual

Default
The priority of an IKE keychain is 100.
Views
IKE keychain view
Predefined user roles
network-admin
Parameters
priority priority: Specifies a priority number in the range of 1 to 65535. The lower the priority number,
the higher the priority.
Usage guidelines
To determine the priority of an IKE keychain, the device examines the existence of the match local
address command before examining the priority number. An IKE keychain with the match local
address command configured has a higher priority than an IKE keychain that does not have the
match local address command configured.
Examples
# Set the priority to 10 for the IKE keychain key1.
<Sysname> system-view
[Sysname] ike keychain key1
[Sysname-ike-keychain-key1] priority 10

priority (IKE profile view)

Use priority to specify a priority for an IKE profile.
Use undo priority to restore the default.
Syntax
priority priority
undo priority
Default
The priority of an IKE profile is 100.
Views
IKE profile view
Predefined user roles
network-admin
Parameters
priority priority: Specifies a priority number in the range of 1 to 65535. The smaller the priority
number, the higher the priority.
Usage guidelines
To determine the priority of an IKE profile, the device examines the existence of the match local
address command before examining the priority number. An IKE profile with the match local
address command configured has a higher priority than an IKE profile that does not have the match
local address command configured.
Examples
# Set the priority to 10 for the IKE profile prof1.
548