HP FlexNetwork MSR Series Command Reference Manual page 54

Default
No authorization attributes are configured for users in the ISP domain and the idle cut feature is
disabled.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
acl acl-number: Specifies an ACL to filter traffic for users. The value range for the acl-number
argument is 2000 to 5999. Typically, the attribute applies to authenticated users. If you configure the
attribute in a portal preauthentication domain, the ACL applies before portal authentication. This
option is applicable only to IPoE, LAN, and portal users.
car: Specifies a CAR action for users. Typically, the attribute applies to authenticated users. If you
configure the attribute in a portal preauthentication domain, the CAR action applies before portal
authentication. This keyword is applicable only to IPoE, portal, and PPP users.
inbound: Specifies the upload rate of users.
outbound: Specifies the download rate of users.
cir committed-information-rate: Specifies the committed information rate in kbps, in the range of 1 to
4194303.
pir peak-information-rate: Specifies the peak information rate in kbps, in the range of 1 to 4194303.
If you do not specify this option, the CAR action does not restrict users by peak information rate.
idle-cut minute: Sets an idle timeout period in minutes. The value range for the minute argument is 1
to 600. This option is applicable only to IPoE, portal, PPP, and wireless LAN users.
flow: Specifies the minimum traffic that must be generated in the idle timeout period in bytes. The
value range is 1 to 10240000, and the default value is 10240.
igmp max-access-number max-access-number: Specifies the maximum number of IGMP groups
that an IPv4 user can join concurrently. The value range for the max-access-number argument is 1 to
64. This option is applicable only to IPoE, portal, and PPP users.
ip-pool pool-name: Specifies an IPv4 address pool for users. The pool-name argument is a
case-insensitive string of 1 to 63 characters. This option is applicable only to IKE, IPoE, portal, and
PPP users.
ipv6-pool ipv6-pool-name: Specifies an IPv6 address pool for users. The ipv6-pool-name argument
is a case-insensitive string of 1 to 63 characters. This option is applicable only to IPoE, portal, and
PPP users.
ipv6-prefix ipv6-prefix prefix-length: Specifies an IPv6 address prefix for users. The value range for
the ipv6-prefix prefix-length argument is 1 to 128. This option is applicable only to IPoE and PPP
users.
mld max-access-number max-access-number: Specifies the maximum number of MLD groups
that an IPv6 user can join concurrently. The value range for the max-access-number argument is 1 to
64. This option is applicable only to IPoE, portal, and PPP users.
primary-dns ip ipv4-address: Specifies the IPv4 address of the primary DNS server for users. This
option is applicable only to IPoE and PPP users.
primary-dns ipv6 ipv6-address: Specifies the IPv6 address of the primary DNS server for users.
This option is applicable only to IPoE and PPP users.
secondary-dns ip ipv4-address: Specifies the IPv4 address of the secondary DNS server for users.
This option is applicable only to IPoE and PPP users.
36