Accounting Login - HP FlexNetwork MSR Series Command Reference Manual
Comware 7 security
Hide thumbs
Also See for FlexNetwork MSR Series:
- Configuration manual (392 pages) ,
- Configuration manuals (159 pages)
Advertisement
When the primary method is invalid, the device attempts to use the backup methods in sequence.
For example, the accounting lan-access radius-scheme radius-scheme-name local none
command specifies a primary RADIUS accounting method and two backup methods (local
accounting and no accounting). The device performs RADIUS accounting by default and performs
local accounting when the RADIUS server is invalid. The device does not perform accounting when
both of the previous methods are invalid.
The following guidelines apply to broadcast accounting:
•
The device sends accounting requests to the primary accounting servers in the specified
broadcast RADIUS schemes at the same time. If a primary server is unavailable, the device
sends accounting requests to the secondary servers of the scheme in the order the servers are
configured.
•
The accounting result is determined by the primary broadcast RADIUS scheme. The
accounting result from the backup scheme is used as reference only. If the primary scheme
does not return any result, the device considers the accounting as a failure.
Examples
# In ISP domain test, perform local accounting for LAN users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting lan-access local
# In ISP domain test, perform RADIUS accounting for LAN users based on scheme rd and use local
accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting lan-access radius-scheme rd local
# In ISP domain test, broadcast accounting requests of LAN users to RADIUS servers in schemes
rd1 and rd2, and use local accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting lan-access broadcast radius-scheme rd1 radius-scheme rd2
local
Related commands
accounting default
local-user
radius scheme
accounting login
Use accounting login to specify the accounting method for login users.
Use undo accounting login to restore the default.
Syntax
In non-FIPS mode:
accounting
radius-scheme-name ] [ local ] [ none ] | local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme hwtacacs-scheme-name ] [ local ] [ none ] }
undo accounting login
In FIPS mode:
login
{
hwtacacs-scheme
hwtacacs-scheme-name
8
[
radius-scheme
Advertisement
