Display Blacklist Ip - HP FlexNetwork MSR Series Command Reference Manual

ICMPv6 echo reply
ICMPv6 group membership query
ICMPv6 group membership report
ICMPv6 group membership reduction
ICMPv6 destination unreachable
ICMPv6 time exceeded
ICMPv6 parameter problem
ICMPv6 packet too big
Table 133 Command output
Field
AttackType
AttackTimes
Dropped
Related commands
reset attack-defense statistics local

display blacklist ip

Use display blacklist ip to display IPv4 blacklist entries.
Syntax
Centralized devices in standalone mode:
display blacklist ip [ source-ip-address [ vpn-instance vpn-instance-name ] [ ds-lite-peer
ds-lite-peer-address ] ] [ count ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display blacklist ip [ source-ip-address [ vpn-instance vpn-instance-name ] [ ds-lite-peer
ds-lite-peer-address ] ] [ slot slot-number ] [ count ]
Distributed devices in IRF mode:
display blacklist ip [ source-ip-address [ vpn-instance vpn-instance-name ] [ ds-lite-peer
ds-lite-peer-address ] ] [ chassis chassis-number slot slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
source-ip-address: Specifies the IPv4 address for a blacklist entry.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the IPv4 address
belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Do not
specify this option if the IPv4 address is on the public network.
ds-lite-peer ds-lite-peer-address: Specifies the IPv6 address of the B4 element of the DS-Lite tunnel
that transmits packets from the blacklisted IPv4 address.
1
1
1
1
1
1
1
1
Description
Type of the attack.
Number of times that the attack occurred.
This command output displays only attacks that are detected.
Number of dropped packets.
860
1
0
0
0
0
0
0
0