Display Blacklist User - HP FlexNetwork MSR Series Command Reference Manual

2013:fe07:221a:4011
# (Centralized devices in standalone mode.) Display the number of IPv6 blacklist entries.
<Sysname> display blacklist ipv6 count
Totally 3 blacklist entries.
# (Distributed devices in standalone mode/centralized devices in IRF mode.) Display the number of
IPv6 blacklist entries on the card or IRF member device in slot 1.
<Sysname> display blacklist ipv6 slot 1 count
Slot 1:
Totally 3 blacklist entries.
# (Distributed devices in IRF mode.) Display the number of IPv6 blacklist entries.
<Sysname> display blacklist ipv6 count
Slot 1 in chassis 1:
Totally 3 blacklist entries.
Slot 2 in chassis 2:
Totally 3 blacklist entries.
Table 135 Command output
Field
IPv6 address
VPN instance
Type
TTL(sec)
Dropped
Totally 3 blacklist entries
Related commands
blacklist ipv6

display blacklist user

Use display blacklist user to display user blacklist entries.
Syntax
display blacklist user [ user-name ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
user-name: Specifies a user by the username, a case-sensitive string of 1 to 55 characters. If you do
not specify a user, this command displays all user blacklist entries.
67890123456789
Description
IPv6 address of the blacklist entry.
MPLS L3VPN instance to which the blacklisted IPv6 address belongs. If
the blacklisted IPv6 address is on the public network, this field displays
hyphens (--).
Type of the IPv6 blacklist entry, Manual or Dynamic.
Remaining aging time of the IPv6 blacklist entry, in seconds. If no aging
time is set for the entry, this field displays Never.
Number of dropped packets sourced from the IPv6 address.
Total number of IPv6 blacklist entries.
864