Password-Control { Aging | Composition | History | Length } Enable - HP FlexNetwork MSR Series Command Reference Manual

Usage guidelines
If you do not specify any parameters, this command displays information about all users in the
password control blacklist.
The users' IP addresses and user accounts are added to the password control blacklist when the
users fail authentication. You can use this command to view information about blacklisted FTP, Web,
and virtual terminal line (VTY) users.
Users accessing the system through the console or AUX interface are not blacklisted either, for the
following reasons:
•
The system is unable to obtain the IP addresses of these users.
•
These users are privileged and, therefore, relatively secure to the system.
Examples
# Display password control blacklist information.
<Sysname> display password-control blacklist
Blacklist items matched: 2.
Username: test
IP: 192.168.44.1
Username: jj
IP: 192.168.44.3
Table 39 Command output
Field
Blacklist items matched
IP
Login failures
Lock flag
password-control { aging | composition | history | length }
enable
Use password-control { aging | composition | history | length } enable to enable the password
expiration, composition restriction, history, or minimum length restriction feature.
Use undo password-control { aging | composition | history | length } enable to disable a
password control feature.
Syntax

password-control { aging | composition | history | length } enable

undo password-control { aging | composition | history | length } enable
Default
The password control features (aging, composition, history, and length) are all enabled.
Views
System view
Login failures: 1
Login failures: 3
Description
Number of blacklisted users.
IP address of the user.
Number of login failures.
Whether the user account is locked for the user:
•
unlock—Not limited.
•
lock—Disabled temporarily
password-control login-attempt command.
355
Lock flag: unlock
Lock flag: lock
or permanently, depending on the