Domain If-Unknown - HP FlexNetwork MSR Series Command Reference Manual

Usage guidelines
The system has only one default ISP domain.
An ISP domain cannot be deleted when it is the default ISP domain. Before you use the undo
domain command, change the domain to a non-default ISP domain by using the undo domain
default enable command.
Examples
# Create an ISP domain named test, and configure the domain as the default ISP domain.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] quit
[Sysname] domain default enable test
Related commands
display domain
domain

domain if-unknown

Use domain if-unknown to specify an ISP domain that accommodates users who are assigned to
nonexistent domains.
Use undo domain if-unknown to restore the default.
Syntax
domain if-unknown isp-domain-name
undo domain if-unknown
Default
No ISP domain is specified to accommodate users who are assigned to nonexistent domains.
Views
System view
Predefined user roles
network-admin
Parameters
isp-domain-name: Specifies the ISP domain name, a case-insensitive string of 1 to 255 characters.
The name must meet the following requirements:
•
The name cannot contain a forward slash (/), backslash (\), vertical bar (|), quotation marks ("),
colon (:), asterisk (*), question mark (?), left angle bracket (<), right angle bracket (>), or at sign
(@).
•
The name cannot be d, de, def, defa, defau, defaul, default, i, if, if-, if-u, if-un, if-unk, if-unkn,
if-unkno, if-unknow, or if-unknown.
Usage guidelines
The device chooses an authentication domain for each user in the following order:
•
The authentication domain specified for the access module.
•
The ISP domain in the username.
•
The default ISP domain of the device.
43