Tunnel Protection Ipsec - HP FlexNetwork MSR Series Command Reference Manual

tunnel protection ipsec

Use tunnel protection ipsec to apply an IPsec profile to a tunnel interface.
Use undo tunnel protection ipsec to restore the default.
Syntax
tunnel protection ipsec profile profile-name
undo tunnel protection ipsec profile
Default
No IPsec profile is applied to a tunnel interface.
Views
Tunnel interface view
Predefined user roles
network-admin
Parameters
profile profile-name: Specify an IPsec profile by its name, a case-insensitive string of 1 to 63
characters. The specified IPsec profile must be an IKE-based IPsec profile.
Usage guidelines
IKE-based IPsec profiles can be applied only to ADVPN tunnel interfaces.
After an IPsec profile is applied to a tunnel interface, the peers negotiate an IPsec tunnel through IKE
to protect data transmitted through the tunnel interface.
Examples
# Apply IPsec profile prf1 to tunnel interface Tunnel 1.
<Sysname> system-view
[Sysname] interface tunnel 1 mode advpn gre
[Sysname-Tunnel1]tunnel protection ipsec profile prf1
Related commands
interface tunnel (Layer 3—IP Services Command Reference)
display interface tunnel (Layer 3—IP Services Command Reference)
ipsec profile
516