Qos Pre-Classify - HP FlexNetwork MSR Series Command Reference Manual

Use undo protocol to restore the default.
Syntax
protocol { ah | ah-esp | esp }
undo protocol
Default
The IPsec transform set uses the ESP protocol.
Views
IPsec transform set view
Predefined user roles
network-admin
Parameters
ah: Specifies the AH protocol.
ah-esp: Specifies using the ESP protocol first and then using the AH protocol.
ah: Specifies the AH protocol.
Usage guidelines
The two tunnel ends must use the same security protocol in the IPsec transform set.
Examples
# Specify the AH protocol for the IPsec transform set.
<Sysname> system-view
[Sysname] ipsec transform-set tran1
[Sysname-ipsec-transform-set-tran1] protocol ah

qos pre-classify

Use qos pre-classify to enable the QoS pre-classify feature.
Use undo qos pre-classify to disable the QoS pre-classify feature.
Syntax
qos pre-classify
undo qos pre-classify
Default
The QoS pre-classify feature is disabled. QoS uses the new IP header of IPsec packets to perform
traffic classification.
Views
IPsec policy view
IPsec policy template view
Predefined user roles
network-admin
Usage guidelines
The QoS pre-classify feature enables QoS to classify packets by using the IP header of the original
IP packets.
498