Traffic-Separate - HP FlexNetwork MSR Series Command Reference Manual

online: Permits users to access the authorized IP subnets after their ITA data quotas are used up.
Examples
# In ITA policy ita1, prohibit users from accessing the authorized IP subnets after their ITA data
quotas are used up.
<Sysname> system-view
[Sysname] ita policy ita1
[Sysname-ita-policy-ita1] traffic-quota-out offline
Related commands
ita policy

traffic-separate

Use traffic-separate enable to exclude the amount of ITA traffic from the overall traffic statistics that
are sent to the accounting server.
Use undo traffic-separate enable to restore the default.
Syntax
traffic-separate enable
undo traffic-separate enable
Default
The amount of ITA traffic is included in the overall traffic statistics that are sent to the accounting
server.
Views
ITA policy view
Predefined user roles
network-admin
Examples
# In ITA policy ita1, exclude the amount of ITA traffic from the overall traffic statistics that are sent to
the accounting server.
<Sysname> system-view
[Sysname] ita policy ita1
[Sysname-ita-policy-ita1] traffic-separate enable
Related commands
ita policy
152