Portal User-Detect - HP FlexNetwork MSR Series Command Reference Manual

undo portal traffic-accounting disable
Default
Traffic accounting for portal users is enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The accounting server might perform time-based or traffic-based accounting, or it might not perform
accounting. If the accounting server does not perform traffic-based accounting, disable traffic
accounting for portal users on the device. The device will provide quick accounting for portal users,
and the traffic statistics will be imprecise. If the accounting server performs traffic-based accounting,
enable traffic accounting for portal users. The device will provide precise traffic statistics for portal
users.
Examples
# Disable traffic accounting for portal users.
<Sysname> system-view
[Sysname] portal traffic-accounting disable

portal user-detect

Use portal user-detect to enable online detection of IPv4 portal users.
Use undo portal user-detect to disable online detection of IPv4 portal users.
Syntax
portal user-detect type { arp | icmp } [ retry retries ] [ interval interval ] [ idle time ]
undo portal user-detect
Default
Online detection of IPv4 portal users is disabled.
Views
Interface view
Predefined user roles
network-admin
Parameters
type: Specifies the detection type.
•
arp—ARP detection.
•
icmp—ICMP detection.
retry retries: Sets the maximum number of detection attempts, in the range of 1 to 10. The default
value is 3.
interval interval: Sets a detection interval in the range of 1 to 1200 seconds. The default interval is 3
seconds.
idle time: Sets a user idle timeout in the range of 60 to 3600 seconds. The default idle timeout is 180
seconds. When the timeout expires, online detection of IPv4 portal users is started.
304