HP FlexNetwork MSR Series Command Reference Manual page 733

display session statistics ipv6 { source-ip source-ip | destination-ip destination-ip | protocol
{ dccp | icmpv6 | raw-ip | sctp | tcp | udp | udp-lite } | source-port source-port | destination-port
destination-port } * [ slot slot-number ]
Distributed devices in IRF mode:
display session statistics ipv6 { source-ip source-ip | destination-ip destination-ip | protocol
{ dccp | icmpv6 | raw-ip | sctp | tcp | udp | udp-lite } | source-port source-port | destination-port
destination-port } * [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
source-ip source-ip: Specifies a source IPv6 address for a unicast session from the initiator to the
responder.
destination-ip destination-ip: Specifies a destination IPv6 address for a unicast session from the
initiator to the responder.
protocol { dccp | icmpv6 | raw-ip | sctp | tcp | udp | udp-lite }: Specifies an IPv6 transport layer
protocol, including DCCP, ICMPv6, RawIP, SCTP, TCP, UDP, and UDP-Lite.
source-port source-port: Specifies a source port by its number. The source-port argument specifies
the source port of an IPv6 unicast session from the initiator to the responder. The value range for the
source-port argument is 0 to 65535.
destination-port destination-port: Specifies a destination port by its number. The destination-port
argument specifies the destination port of an IPv6 unicast session from the initiator to the responder.
The value range for the destination-port argument is 0 to 65535.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays IPv6 unicast session statistics for all cards. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays IPv6 unicast session statistics for all member devices. (Centralized
devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
IPv6 unicast session statistics for all cards. (Distributed devices in IRF mode.)
Examples
# Display statistics for unicast sessions from IPv6 address 100::2.
<Sysname> display session statistics ipv6 source-ip 100::2
Slot 1:
Current sessions: 3
TCP sessions:
UDP sessions:
ICMP sessions:
ICMPv6 sessions:
UDP-Lite sessions:
SCTP sessions:
DCCP sessions:
RAWIP sessions:
0
0
3
0
0
0
0
0
715