Authorization Lan-Access - HP FlexNetwork MSR Series Command Reference Manual

In FIPS mode:
authorization ipoe { local | radius-scheme radius-scheme-name [ local ] }
undo authorization ipoe
Default
The default authorization method for the ISP domain is used for IPoE users.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
local: Performs local authorization.
none: Does not perform authorization.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive
string of 1 to 32 characters.
Usage guidelines
The RADIUS authorization configuration takes effect only when authentication and authorization
methods of the ISP domain use the same RADIUS scheme.
You can specify one primary authorization method and multiple backup authorization methods.
When the primary method is invalid, the device attempts to use the backup methods in sequence.
For example, the authorization ipoe radius-scheme radius-scheme-name local none command
specifies a primary RADIUS authorization method and two backup methods (local authorization and
no authorization). The device performs RADIUS authorization by default and performs local
authorization when the RADIUS server is invalid. The device does not perform authorization when
both of the previous methods are invalid.
Examples
# In ISP domain test, perform local authorization for IPoE users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization ipoe local
# In ISP domain test, perform RADIUS authorization for IPoE users based on scheme rd and use
local authorization as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization ipoe radius-scheme rd local
Related commands
authorization default
local-user
radius scheme

authorization lan-access

Use authorization lan-access to configure the authorization method for LAN users.
Use undo authorization lan-access to restore the default.
30