Display Attack-Defense Scan Victim Ip - HP FlexNetwork MSR Series Command Reference Manual

Field
VPN instance
Protocol
Detected on
Duration(min)
Related commands
display attack-defense scan victim ipv6
scan detect

display attack-defense scan victim ip

Use display attack-defense scan victim ip to display information about IPv4 scanning attack
victims.
Syntax
Centralized devices in standalone mode:
display attack-defense scan victim ip [ interface interface-type interface-number | local ]
[ count ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display attack-defense scan victim ip [ [ interface interface-type interface-number | local ] [ slot
slot-number ] ] [ count ]
Distributed devices in IRF mode:
display attack-defense scan victim ip [ [ interface interface-type interface-number | local ]
[ chassis chassis-number slot slot-number ] ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
local: Specifies the device.
slot slot-number: Specifies a card by its slot number. This option is available only when you specify
the device or a global interface, such as a VLAN interface or tunnel interface. If you do not specify a
card, this command displays information about IPv4 scanning attack victims for all cards.
(Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. This option is available only
when you specify the device or a global interface, such as a VLAN interface or tunnel interface. If you
do not specify a member device, this command displays information about IPv4 scanning attack
victims for all member devices. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. This option is available only when you specify the
Description
MPLS L3VPN instance to which the attacker IPv6 address belongs. If the
attacker IPv6 address is on the public network, this field displays hyphens
(--).
Name of the protocol.
Where the attack is detected, on the device (Local) or an interface.
The amount of time the attack lasts, in minutes.
845