Parameters
ip ipv4-address: Specifies a DAE client by its IPv4 address.
ipv6 ipv6-address: Specifies a DAE client by its IPv6 address.
key: Specifies the shared key for secure communication between the RADIUS DAE client and
server. Make sure the shared key is the same as the key configured on the RADIUS DAE client. If the
RADIUS DAE client does not have any shared key, do not specify this option.
cipher: Specifies the key in encrypted form.
simple: Specifies the key in plaintext form. For security purposes, the key specified in plaintext form
will be stored in encrypted form.
string: Specifies the key. This argument is case sensitive.
•
In non-FIPS mode, the encrypted form of the key is a string of 1 to 117 characters. The plaintext
form of the key is a string of 1 to 64 characters.
•
In FIPS mode, the encrypted form of the key is a string of 15 to 117 characters. The plaintext
form of the key is a string of 15 to 64 characters. The plaintext string must contain characters
from digits, uppercase letters, lowercase letters, and special characters.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance to which the RADIUS DAE
client belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If
the server is on the public network, do not specify this option.
Usage guidelines
The device discards DAE packets sent from DAE clients that are not specified for the DAE server.
You can execute the client command multiple times to specify multiple DAE clients for the DAE
server.
Examples
# Specify the DAE client as 10.110.1.2 in VPN instance abc. Set the shared key to 123456 in
plaintext form for secure communication between the DAE server and client.
<Sysname> system-view
[Sysname] radius dynamic-author server
[Sysname-radius-da-server] client ip 10.110.1.2 key simple 123456 vpn-instance abc
Related commands
radius dynamic-author server
port
data-flow-format (RADIUS scheme view)
Use data-flow-format to set the data flow and packet measurement units for traffic statistics.
Use undo data-flow-format to restore the default.
Syntax
data-flow-format { data { byte | giga-byte | kilo-byte | mega-byte } | packet { giga-packet |
kilo-packet | mega-packet | one-packet } } *
undo data-flow-format { data | packet }
Default
Traffic is counted in bytes and packets.
Views
RADIUS scheme view
86