Display Aspf Policy - HP FlexNetwork MSR Series Command Reference Manual
Comware 7 security
Hide thumbs
Also See for FlexNetwork MSR Series:
- Configuration manual (392 pages) ,
- Configuration manuals (159 pages)
Advertisement
Predefined user roles
network-admin
network-operator
Examples
# Display ASPF policy application on interfaces.
<Sysname> display aspf interface
Interface configuration:
GigabitEthernet1/0/1
Inbound policy : 1
Outbound policy: none
Table 91 Command output
Field
Interface configuration
Inbound policy
Outbound policy
Related commands
aspf apply policy
aspf policy
display aspf policy
Use display aspf policy to display the configuration of an ASPF policy.
Syntax
display aspf policy { aspf-policy-number | default }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
aspf-policy-number: Specifies the number of an ASPF policy. The value range for this argument is 1
to 256.
default: Specifies the predefined ASPF policy.
Examples
# Display the configuration of ASPF policy 1.
<Sysname> display aspf policy 1
ASPF policy configuration:
Policy number: 1
ICMP error message check: Disabled
TCP SYN packet check: Enabled
Inspected protocol
Description
Interfaces where ASPF policy is applied.
Inbound ASPF policy number.
Outbound ASPF policy number.
Action
663
Advertisement
