Reset Session Table Multicast Ipv6 - HP FlexNetwork MSR Series Command Reference Manual

udp-lite } ] [ source-port source-port ] [ destination-port destination-port ] [ vpn-instance
vpn-instance-name ]
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
clears information for all cards. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command clears information for all member devices. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on a member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command clears
information for all cards. (Distributed devices in IRF mode.)
source-ip source-ip: Specifies a source IPv4 address. The source-ip argument specifies the source
IPv4 address of a multicast session from the initiator to the responder.
destination-ip destination-ip: Specifies a destination IPv4 address. The destination-ip argument
specifies the destination IPv4 address of a multicast session from the initiator to the responder.
protocol { dccp | icmp | raw-ip | sctp | tcp | udp | udp-lite }: Specifies an IPv4 transport layer
protocol, including DCCP, ICMP, RawIP, SCTP, TCP, UDP, and UDP-Lite.
source-port source-port: Specifies a source port by its number. The source-port argument specifies
the source port of a multicast session from the initiator to the responder. The value range for the
source-port argument is 0 to 65535.
destination-port destination-port: Specifies a destination port by its number. The destination-port
argument specifies the destination port of a multicast session from the initiator to the responder. The
value range for the destination-port argument is 0 to 65535.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. If you want to clear IPv4 multicast session entries on the
public network, do not specify this option.
Usage guidelines
If you do not specify any parameters, this command clears all IPv4 multicast session entries on the
public network.
Examples
# Clear all IPv4 multicast session entries.
<Sysname> reset session table multicast ipv4
# Clear the IPv4 multicast session entries with the source IP address of 10.10.10.10.
<Sysname> reset session table multicast ipv4 source-ip 10.10.10.10
Related commands
display session table multicast ipv4

reset session table multicast ipv6

Use reset session table multicast ipv6 to clear information about IPv6 multicast session entries
that match specific criteria.
748