Blacklist Object-Group - HP FlexNetwork MSR Series Command Reference Manual

%Mar 13 03:47:49:736 2013 Sysname BLS/5/BLS_ENTRY_ADD:SrcIPAddr(1003)=192.168.100.12;
DSLiteTunnelPeer(1040)=--; RcvVPNInstance(1041)=--; TTL(1051)=;
Reason(1052)=Configuration.
# Delete 192.168.1.2 from the blacklist. A log is output for the deletion event.
[Sysname] undo blacklist ip 192.168.100.12
%Mar 13 03:49:52:737 2013 Sysname BLS/5/BLS_ENTRY_DEL:SrcIPAddr(1003)=192.168.100.12;
DSLiteTunnelPeer(1040)=--; RcvVPNInstance(1041)=--; Reason(1052)=Configuration.
Related commands
blacklist ip
blacklist ipv6

blacklist object-group

Use blacklist object-group to add an address object group to the blacklist.
Use undo blacklist object-group to restore the default.
Syntax
blacklist object-group object-group-name
undo blacklist object-group
Default
No address object group is added to the blacklist.
Views
System view
Predefined user roles
network-admin
Parameters
object-group-name: Specifies an address object group by its name, a case-insensitive string of 1 to
31 characters.
Usage guidelines
This command must be used together with the address object group feature. For more information
about address object groups, see "Configuring object groups."
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Add address object group object-group1 to the blacklist.
<Sysname> system-view
[Sysname] blacklist object-group object-group1
blacklist user
Use blacklist user to add a user blacklist entry.
Use undo blacklist user to delete a user blacklist entry.
Syntax
blacklist user user-name [ timeout minutes ]
undo blacklist user user-name
819