Session State-Machine Mode Loose - HP FlexNetwork MSR Series Command Reference Manual

session state-machine mode loose

Use session state-machine mode loose to set the mode of session state machine to loose.
Use undo session state-machine mode loose to restore the default.
Syntax
session state-machine mode loose
undo session state-machine mode loose
Default
The session state machine is in strict mode.
Views
System view
Predefined user roles
network-admin
Usage guidelines
For asymmetric-path networks, if session synchronization is enabled, to prevent the device from
dropping packets abnormally, set the mode of the session state machine to loose.
As a best practice, do not configure this command on symmetric-path networks.
Examples
# Set the mode of session state machine to loose.
<Sysname> system-view
[Sysname] session state-machine mode loose
session statistics enable
Use session statistics enable to enable session statistics collection.
Use undo session statistics enable to disable session statistics collection.
Syntax
session statistics enable
undo session statistics enable
Default
Session statistics collection is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command enables the device to collect the session-based outbound and inbound packets and
bytes.
To display statistics per session, use the display session table command. To display statistics per
packet type, use the display session statistics command.
759