Reset Session Table Multicast - HP FlexNetwork MSR Series Command Reference Manual

reset session table ipv6 [ chassis chassis-number slot slot-number ] [ source-ip source-ip ]
[ destination-ip destination-ip ] [ protocol { dccp | icmpv6 | raw-ip | sctp | tcp | udp | udp-lite } ]
[ source-port
vpn-instance-name ]
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
clears information for all cards. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command clears information for all member devices. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on a member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command clears
information for all cards. (Distributed devices in IRF mode.)
source-ip source-ip: Specifies a source IPv6 address. The source-ip argument specifies the source
IPv6 address of a unicast session from the initiator to the responder.
destination-ip destination-ip: Specifies a destination IPv6 address. The destination-ip argument
specifies the destination IPv6 address of a unicast session from the initiator to the responder.
protocol { dccp | icmpv6 | raw-ip | sctp | tcp | udp | udp-lite }: Specifies an IPv6 transport layer
protocol, including DCCP, ICMPv6, Raw IP, SCTP, TCP, UDP, and UDP-Lite.
source-port source-port: Specifies a source port by its number. The source-port argument specifies
the source port of a unicast session from the initiator to the responder. The value range for the
source-port argument is 0 to 65535.
destination-port destination-port: Specifies a destination port by its number. The destination-port
argument specifies the destination port of a unicast session from the initiator to the responder. The
value range for the destination-port argument is 0 to 65535.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. If you want to clear IPv6 unicast session entries on the
public network, do not specify this option.
Usage guidelines
If you do not specify any parameters, this command clears all IPv6 unicast session entries on the
public network.
Examples
# Clear all IPv6 unicast session entries.
<Sysname> reset session table ipv6
# Clear the IPv6 unicast session entries with the source IP address of 2011::0002.
<Sysname> reset session table ipv6 source-ip 2011::0002
Related commands
display session table ipv6

reset session table multicast

Use reset session table multicast to clear IPv4 and IPv6 multicast session entries.
source-port ] [ destination-port destination-port
746
] [ vpn-instance