Display Arp Detection Statistics - HP FlexNetwork MSR Series Command Reference Manual

display arp detection statistics

Use display arp detection statistics to display ARP attack detection statistics.
Syntax
display arp detection statistics [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Displays the ARP attack detection statistics of an
interface.
Usage guidelines
This command displays numbers of packets discarded by user validity check and ARP packet
validity check. If you do not specify an interface, the command displays statistics for all interfaces.
Examples
# Display the ARP attack detection statistics for all interfaces.
<Sysname> display arp detection statistics
State: U-Untrusted
ARP packets dropped by ARP inspect checking:
Interface(State)
GE1/0/1(U)
GE1/0/2(U)
GE1/0/3(T)
GE1/0/4(U)
Table 144 Command output
Field
State
Interface(State)
IP
Src-MAC
Dst-MAC
Inspect
reset arp detection statistics
Use reset arp detection statistics to clear ARP attack detection statistics.
T-Trusted
IP Src-MAC
40 0
0 0
0 0
0 0
Description
State of an interface:
•
U—ARP untrusted interface.
•
T—ARP trusted interface.
Inbound interface of ARP packets. State specifies the port state, trusted or
untrusted.
Number of ARP packets discarded due to invalid sender and target IP addresses.
Number of ARP packets discarded due to invalid source MAC address.
Number of ARP packets discarded due to invalid destination MAC address.
Number of ARP packets that failed to pass user validity check.
949
Dst-MAC Inspect
0 78
0 0
0 0
30 0