Display Portal Extend-Auth-Server - HP FlexNetwork MSR Series Command Reference Manual

Field
Extend-auth domain
Pre-auth domain
User-dhcp-only
Pre-auth ip-pool
Max portal users
Bas-ip
Bas-ipv6
User detection
Portal temp-pass
Action for server detection
Layer3 source subnet
Destination
subnet
IP address
Mask
Prefix length

display portal extend-auth-server

Use display portal extend-auth-server to display information about third-party authentication
servers.
Syntax
display portal extend-auth-server { all | qq | mail }
Description
Authentication domain configured for third-party authentication on an
interface or service template.
Preauthentication domain for portal users on the interface.
Status of the user-dhcp-only feature:
•
Enabled: Only users with IP addresses obtained through DHCP can
perform portal authentication.
•
Disabled: Both users with IP addresses obtained through DHCP
and users with static IP addresses can pass authentication to get
online.
Name of the IP address pool specified for portal users before
authentication.
Maximum number of portal users allowed on an interface.
BAS-IP attribute of the portal packets sent to the portal authentication
server.
BAS-IPv6 attribute of the portal packets sent to the portal authentication
server.
Configuration for online detection of portal users on the interface,
including detection method (ARP, ICMP, ND, or ICMPv6), detection
interval, maximum number of detection attempts, and user idle time.
Status of the temporary pass feature:
•
Enabled—The temporary pass feature is enabled.
•
Disabled—The temporary pass feature is disabled.
•
Period—Temporary pass period during which a user can access the
Internet temporarily. This field is displayed only if the temporary pass
feature is enabled.
Portal server detection configuration on the interface:
•
Server type—Type of the server. Portal server represents the
portal authentication server, and Web server represents the portal
Web server.
•
Server name—Name of the server.
•
Action—Action triggered by the result of server detection. This field
displays fail-permit when the portal fail-permit feature is enabled.
Information of the portal authentication source subnet.
authentication
Information of the portal authentication destination subnet.
IP address of the portal authentication subnet.
Subnet mask of the portal authentication subnet.
Prefix length of the IPv6 portal authentication subnet address.
217