Authentication Lan-Access - HP FlexNetwork MSR Series Command Reference Manual

When the primary method is invalid, the device attempts to use the backup methods in sequence.
For example, the authentication ipoe radius-scheme radius-scheme-name local none command
specifies a primary RADIUS authentication method and two backup methods (local authentication
and no authentication). The device performs RADIUS authentication by default and performs local
authentication when the RADIUS server is invalid. The device does not perform authentication when
both of the previous methods are invalid.
Examples
# In ISP domain test, perform local authentication for IPoE users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication ipoe local
# In ISP domain test, perform RADIUS authentication for IPoE users based on scheme rd and use
local authentication as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication ipoe radius-scheme rd local
Related commands
authentication default
local-user
radius scheme

authentication lan-access

Use authentication lan-access to configure the authentication method for LAN users.
Use undo authentication lan-access to restore the default.
Syntax
In non-FIPS mode:
authentication lan-access { ldap-scheme ldap-scheme-name [ local ] [ none ] | local [ none ] |
none | radius-scheme radius-scheme-name [ local ] [ none ] }
undo authentication lan-access
In FIPS mode:
authentication lan-access { ldap-scheme ldap-scheme-name [ local ] | local | radius-scheme
radius-scheme-name [ local ] }
undo authentication lan-access
Default
The default authentication method for the ISP domain is used for LAN users.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
ldap-scheme ldap-scheme-name: Specifies an LDAP scheme by its name, a case-insensitive string
of 1 to 32 characters.
local: Performs local authentication.
19