Download Print this page

Nas-Port-Type - HP FlexNetwork MSR Series Command Reference Manual

Comware 7 security
Hide thumbs Also See for FlexNetwork MSR Series:

Advertisement

Predefined user roles
network-admin
Parameters
imap: Specifies the Internet Message Access Protocol (IMAP).
pop3: Specifies the Post Office Protocol 3 (POP3).
Usage guidelines
This command specifies email protocols that the device uses to interact with the email authentication
server to perform authentication and authorization on portal users who uses email authentication.
Examples
# Specify the POP3 protocol for email authentication.
<Sysname> system-view
[Sysname] portal extend-auth-server mail
[Sysname-portal-extend-auth-server-mail] mail-protocol pop3
Related commands
display portal extend-auth-server

nas-port-type

Use nas-port-type to specify the NAS-Port-Type value carried in RADIUS requests sent to the
RADIUS server.
Use undo nas-port-type to restore the default.
Syntax
nas-port-type value
undo nas-port-type
Default
The NAS-Port-Type value carried in RADIUS requests is 0.
Views
MAC binding server view
Predefined user roles
network-admin
Parameters
value: Specifies the NAS-Port-Type value in the range of 1 to 255.
Usage guidelines
Some MAC binding servers identify MAC-based quick portal authentication by a specific
NAS-Port-Type value in received RADIUS requests. To communicate with such a MAC binding
server, you must configure the device to use the NAS-Port-Type value required by the MAC binding
server.
Examples
# Set the NAS-Port-Type value in RADIUS requests sent to the MAC binding server mts to 30.
<Sysname> system-view
[Sysname] portal mac-trigger-server mts
[Sysname-portal-mac-trigger-server-mts] nas-port-type 30
263

Advertisement

loading