Display Ssh User-Information - HP FlexNetwork MSR Series Command Reference Manual

Field
State
Retries
Serv
Username
Idx

display ssh user-information

Use display ssh user-information to display information about SSH users on an SSH server.
Syntax
display ssh user-information [ username ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
username: Specifies an SSH username, a case-sensitive string of 1 to 80 characters. If you do not
specify an SSH user, this command displays information about all SSH users.
Usage guidelines
This command displays information only about SSH users that are configured by using the ssh user
command on the SSH server.
Examples
# Display information about all SSH users.
<Sysname> display ssh user-information
Total ssh users:2
Username
yemx
test
Description
Session state:
•
Init—Initialization.
•
Ver-exchange—Version negotiation.
•
Keys-exchange—Key exchange.
•
Auth-request—Authentication request.
•
Serv-request—Session service request.
•
Established—The session is established.
•
Disconnected—The session is terminated.
Number of authentication failures.
Service type:
•
SCP.
•
SFTP.
•
Stelnet.
•
NETCONF.
Username that the client uses to log in to the server.
Absolute number of the user line. The value for this field is empty if
the SSH connection for the user is not redirected.
Authentication-type
password
publickey
597
User-public-key-name
pubkey
Service-type
Stelnet|SFTP
SFTP