HP FlexNetwork MSR Series Command Reference Manual page 743

Distributed devices in standalone mode/centralized devices in IRF mode:
display session table ipv6 [ slot slot-number ] [ source-ip start-source-ip [ end-source-ip ] ]
[ destination-ip start-destination-ip [ end-destination-ip ] ] [ protocol { dccp | icmp | raw-ip | sctp |
tcp | udp | udp-lite } ] [ source-port source-port ] [ destination-port destination-port ]
[ vpn-instance vpn-name ] [ verbose ]
Distributed devices in IRF mode:
display session table ipv6 [ chassis chassis-number slot slot-number ] [ source-ip start-source-ip
[ end-source-ip ] ] [ destination-ip start-destination-ip [ end-destination-ip ] ] [ protocol { dccp |
icmp | raw-ip | sctp | tcp | udp | udp-lite } ] [ source-port source-port ] [ destination-port
destination-port ] [ vpn-instance vpn-name ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays information for all cards. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information for all member devices. (Centralized devices in IRF
mode.)
chassis chassis-number slot slot-number: Specifies a card on a member device. The
chassis-number argument represents the member ID of the member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
information for all cards. (Distributed devices in IRF mode.)
source-ip start-source-ip [ end-source-ip ]: Specifies a source IPv6 address or IPv6 address range
for a unicast session from the initiator to the responder. The start source-ip argument specifies the
start source IPv6 address. The end source-ip argument specifies the end source IPv6 address.
destination-ip start-destination-ip [ end-destination-ip ]: Specifies a destination IPv6 address or
IPv6 address range for a unicast session from the initiator to the responder. The start destination-ip
argument specifies the start destination IPv6 address. The end destination-ip argument specifies the
end destination IPv6 address.
protocol { dccp | icmpv6 | raw-ip | sctp | tcp | udp | udp-lite }: Specifies an IPv6 transport layer
protocol, including DCCP, ICMPv6, RawIP, SCTP, TCP, UDP, and UDP-Lite.
source-port source-port: Specifies a source port by its number. The source-port argument specifies
the source port of a unicast session from the initiator to the responder. The value range for the
source-port argument is 0 to 65535.
destination-port destination-port: Specifies a destination port by its number. The destination-port
argument specifies the destination port of a unicast session from the initiator to the responder. The
value range for the destination-port argument is 0 to 65535.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters.
verbose: Displays detailed information about IPv6 unicast session entries. If you do not specify this
keyword, the command displays brief information about IPv6 unicast session entries.
Usage guidelines
If you do not specify any parameters, this command displays all IPv6 unicast session entries.
725