HP FlexNetwork MSR Series Command Reference Manual page 107

Field
Port
VPN
State
Test profile
Probe username
Probe interval
Accounting-On function
extended function
retransmission times
retransmission
interval(seconds)
Timeout Interval(seconds)
Retransmission times
Retransmission Times
Accounting Update
Server Quiet Period(minutes)
Realtime Accounting
Interval(minutes)
NAS IP Address
VPN
User Name Format
Data flow unit
Packet unit
Attribute 15 check-mode
Attribute 25
Description
Service port number of the server. If no port number is specified, this field
displays the default port number.
MPLS L3VPN instance to which the server belongs. If no VPN instance is
specified for the server, this field displays Not configured.
Status of the server:
•
Active—The server is in active state.
•
Block—The server is changed to blocked state automatically.
•
Block (Mandatory)—The server is set to blocked state manually.
Test profile used for RADIUS server status detection.
Username used for RADIUS server status detection.
Server status detection interval, in minutes.
Whether the accounting-on feature is enabled.
Whether the extended accounting-on feature is enabled.
Number of accounting-on packet transmission attempts.
Interval at which the device retransmits accounting-on packets, in
seconds.
RADIUS server response timeout period, in seconds.
Maximum number of attempts for transmitting a RADIUS packet to a
single RADIUS server.
for
Maximum number of accounting attempts.
Quiet period for the servers, in minutes.
Interval for sending real-time accounting updates, in minutes.
Source IP address for outgoing RADIUS packets.
MPLS L3VPN instance to which the RADIUS scheme belongs. If no VPN
instance is specified for the server, this field displays Not configured.
Format for the usernames sent to the RADIUS server. Possible values
include:
•
with-domain—Includes the domain name.
•
without-domain—Excludes the domain name.
•
keep-original—Forwards the username as the username is
entered.
Measurement unit for data flow.
Measurement unit for packets.
RADIUS Login-Service attribute check method for SSH, FTP, and
terminal users:
•
Strict—Matches Login-Service attribute values 50, 51, and 52 for
SSH, FTP, and terminal services, respectively.
•
Loose—Matches the standard Login-Service attribute value 0 for
SSH, FTP, and terminal services.
RADIUS attribute 25 interpretation status:
•
Standard—The attribute is not interpreted as CAR parameters.
•
CAR—The attribute is interpreted as CAR parameters.
89