Reset Session Table Ipv4 - HP FlexNetwork MSR Series Command Reference Manual

Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
clears unicast session entries for all cards. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command clears unicast session entries for all member devices. (Centralized devices in
IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on a member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command clears
unicast session entries for all cards. (Distributed devices in IRF mode.)
Examples
# Clear all IPv4 and IPv6 unicast session entries.
<Sysname> reset session table
Related commands
display session table ipv4
display session table ipv6

reset session table ipv4

Use reset session table ipv4 to clear information about IPv4 unicast session entries that match
specific criteria.
Syntax
Centralized devices in standalone mode:
reset session table ipv4 [ source-ip source-ip ] [ destination-ip destination-ip ] [ protocol { dccp |
icmp | raw-ip | sctp | tcp | udp | udp-lite } ] [ source-port source-port ] [ destination-port
destination-port ] [ vpn-instance vpn-instance-name ]
Distributed devices in standalone mode/centralized devices in IRF mode:
reset session table ipv4 [ slot slot-number ] [ source-ip source-ip ] [ destination-ip destination-ip ]
[ protocol { dccp | icmp | raw-ip | sctp | tcp | udp | udp-lite } ] [ source-port source-port ]
[ destination-port destination-port ] [ vpn-instance vpn-instance-name ]
Distributed devices in IRF mode:
reset session table ipv4 [ chassis chassis-number slot slot-number ] [ source-ip source-ip ]
[ destination-ip destination-ip ] [ protocol { dccp | icmp | icmpv6 | raw-ip | sctp | tcp | udp |
udp-lite } ] [ source-port source-port ] [ destination-port destination-port ] [ vpn-instance
vpn-instance-name ]
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
clears information for all cards. (Distributed devices in standalone mode.)
744