Include Application - HP FlexNetwork MSR Series Command Reference Manual

<Sysname> display port-mapping user-defined
Application
-------------------------------------------------------------
FTP
FTP
FTP
FTP
FTP
HTTP
HTTP
Table 100 Command output
Field
Application
Port
Protocol
Match Type
Match Condition

include application

Use include application to add application protocols to an application group.
Use undo include application to remove application protocols from an application group.
Syntax
include application application-name
undo include application application-name
Port Protocol Match Type
21 TCP
21 UDP
2121 UDP
21 UDP
21 SCTP
899 TCP
999 SCTP
Description
Application protocol using port mapping.
Port number to which the application protocol is mapped.
Transport layer protocol.
Match types:
•
•
•
•
•
•
•
Match conditions:
•
•
•
For IP address-based and subnet-based host-port mappings,
the MPLS L3VPN instance names are displayed if you
configured them.
695
Match Condition
--- ---
IPv4 host 10.10.10.1(vpn1)
IPv4 host [11.10.10.1, 11.10.10.10](vpn2)
IPv4 subnet 10.10.10.1/24
IPv6 host 2000:fdb8::1:00ab:853c:39ab
IPv4 ACL 2002
IPv6 ACL 2002
---—No match types or match conditions are specified, and
all packets that have the specified port are recognized as
the packets of the specified application protocol.
IPv4 host—A match based on the destination IPv4
addresses of the packet.
IPv6 host—A match based on the destination IPv6
addresses of the packet.
IPv4 subnet—A match based on the destination IPv4
subnet of the packet.
IPv6 subnet—A match based on the destination IPv6
subnet of the packet.
IPv4 ACL—A match based on the IPv4 ACL.
IPv6 ACL—A match based on the IPv6 ACL.
For the match type of IPv4 host or IPv6 host, the destination
IP addresses of the packets are displayed.
For the match type of IPv4 subnet or IPv6 subnet, the
destination subnet addresses of the packets are displayed.
For the match type of IPv4 ACL or IPv6 ACL, the correct
ACL number is displayed.