Url-Parameter - HP FlexNetwork MSR Series Command Reference Manual

Syntax
url url-string
undo url
Default
No URL is specified for a portal Web server.
Views
Portal Web server view
Predefined user roles
network-admin
Parameters
url-string: Specifies a URL for the portal Web server, a case-sensitive string of 1 to 256 characters.
Usage guidelines
This command specifies a URL that can be accessed through standard HTTP or HTTPS. The URL
should start with http:// or https://. If the URL you specify does not start with http:// or https://, the
system considers the URL begins with http:// by default.
Examples
# Configure the URL for the portal Web server wbs as http://www.test.com/portal.
<Sysname> system-view
[Sysname] portal web-server wbs
[Sysname-portal-websvr-wbs] url http://www.test.com/portal
Related commands
display portal web-server

url-parameter

Use url-parameter to configure the parameters carried in the URL of a portal Web server. The
access device redirects a portal user by sending the URL with the parameters to the user.
Use undo url-parameter to delete the parameters carried in the URL of the portal Web server.
Syntax
url-parameter param-name { nas-id | nas-port-id | original-url | source-address | ssid | { ap-mac
| source-mac } [ encryption { aes | des } key { cipher | simple } string ] | value expression }
undo url-parameter param-name
Default
No URL parameters are configured for a portal Web server.
Views
Portal Web server view
Predefined user roles
network-admin
Parameters
param-name: Specifies a URL parameter name, a case-sensitive string of 1 to 32 characters.
Content of the parameter is determined by the following keyword you specify.
nas-id: Specifies the NAS-ID.
316