Download Print this page

HP FlexNetwork MSR Series Command Reference Manual page 232

Comware 7 security
Hide thumbs Also See for FlexNetwork MSR Series:

Advertisement

2.2.2.2
IPv6:
Portal status: Enabled
Authentication type: Direct
Portal Web server: wbsv6(active)
Secondary portal Web server: Not configured
Authentication domain: my-domain
Extend-auth domain: Not configured
User-dhcp-only: Disabled
Max portal users: 512
Bas-ipv6: 2000::1
Action for sever detection:
Server type
Web server
Portal server
Destination authentication subnet:
IP address
3000::1
# Display portal configuration and portal running state on VLAN-interface 30.
<Sysname> display portal Vlan-interface 30
Portal information of Vlan-interface30
NAS-ID profile: Not configured
Authorization : Strict checking
ACL
User profile
IPv4:
Portal status: Enabled
Authentication type: Direct
Portal Web server: pt(active)
Secondary portal Web server: wbs sec
Authentication domain: test
Pre-auth domain: Not configured
Extend-auth domain: def
User-dhcp-only: Disabled
Pre-auth IP pool: Not configured
Max portal users: Not configured
Bas-ip: Not configured
User detection: Not configured
Portal temp-pass: Enabled,
Action for server detection:
Server type
--
Layer3 source network:
IP address
Destination authentication subnet:
IP address
IPv6:
Server name
wbsv6
ptsv6
: Disable
: Disable
Server name
--
Mask
Mask
214
255.255.0.0
Action
fail-permit
fail-permit
Prefix length
64
Period: 30s
Action
--

Advertisement

loading