Portal Fail-Permit Web-Server - HP FlexNetwork MSR Series Command Reference Manual

access network resources. Portal users who have passed authentication can continue accessing
network resources.
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Enable portal fail-permit for portal authentication server pts1 on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] portal fail-permit server pts1
Related commands
display portal

portal fail-permit web-server

Use portal [ ipv6 ] fail-permit web-server to enable the portal fail-permit feature for portal Web
servers.
Use undo portal [ ipv6 ] fail-permit web-server to disable the portal fail-permit feature for portal
Web servers.
Syntax
Interface view:
portal [ ipv6 ] fail-permit web-server
undo portal [ ipv6] fail-permit web-server
Service template view:
portal fail-permit web-server
undo portal fail-permit web-server
Default
Portal fail-permit is disabled for portal Web servers.
Views
Interface view
Service template view
Predefined user roles
network-admin
Parameters
ipv6: Specifies IPv6 portal Web servers. To specify IPv4 portal Web servers, do not specify this
keyword.
Usage guidelines
The following matrix shows the support of the MSR routers for this command in different views:
Hardware
MSR954
(JH296A/JH297A/JH298A/JH299A/JH373A)
MSR958 (JH300A/JH301A)
MSR1002-4/1003-8S
Interface view
Yes
Yes
No
277
Service template view
Yes
No
No