Port-Security Authorization Ignore - HP FlexNetwork MSR Series Command Reference Manual

<Sysname> display port-security mac-address security interface gigabitethernet 1/0/1 vlan
1
MAC ADDR
000d-88f8-0577
--- 1 mac address(es) found
Table 36 Command output
Field
MAC ADDR
VLAN ID
STATE
PORT INDEX
AGING TIME
number mac address(es) found
Related commands
port-security mac-address security

port-security authorization ignore

Use port-security authorization ignore to configure a port to ignore the authorization information
received from the authentication server (a RADIUS server or the local device).
Use undo port-security authorization ignore to restore the default.
Syntax
port-security authorization ignore
undo port-security authorization ignore
Default
A port uses the authorization information from the server.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
After a user passes RADIUS or local authentication, the server performs authorization based on the
authorization attributes configured for the user account. For example, the server can assign a VLAN.
If you do not want the port to use such authorization attributes for users, use this command to ignore
the authorization information from the server.
VLAN ID STATE
1 Security
---
Description
Secure MAC address.
ID of the VLAN to which the port belongs.
Type of the MAC address added. This field displays Security for a
secure MAC address.
Port to which the secure MAC address belongs.
Period of time before the secure MAC address ages out.
•
•
Number of secure MAC addresses stored.
PORT INDEX
GE1/0/1
If the secure MAC address is a static MAC address, this field
displays NOAGED.
If the secure MAC address is a sticky MAC address, this field
displays the remaining lifetime in minutes. By default, sticky
MAC addresses do not age out, and this field displays
NOAGED.
330
AGING TIME
NOAGED