Identity - HP FlexNetwork MSR Series Command Reference Manual

Examples
# Create an IKEv2 keychain named key1.
<Sysname> system-view
[Sysname] ikev2 keychain key1
# Create an IKEv2 peer named peer1.
[Sysname-ikev2-keychain-key1] peer peer1
# Specify the host name test of the IKEv2 peer.
[Sysname-ikev2-keychain-key1-peer-peer1] hostname test
Related commands
ikev2 keychain
peer

identity

Use identity to specify the ID of an IKEv2 peer.
Use undo identity to restore the default.
Syntax
identity { address { ipv4-address | ipv6 { ipv6-address } } | fqdn fqdn-name | email email-string |
key-id key-id-string }
undo identity
Default
The IKEv2 peer's ID is not specified.
Views
IKEv2 peer view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the IPv4 address of the peer.
ipv6 ipv6-address: Specifies the IPv6 address of the peer.
fqdn fqdn-name: Specifies the FQDN of the peer. The fqdn-name argument is a case-sensitive
string of 1 to 255 characters, such as www.test.com.
email email-string: Specifies the email address of the peer. The email-string argument is a
case-sensitive string of 1 to 255 characters in the format defined by RFC 822, such as
esec@test.com.
key-id key-id: Specifies the remote gateway's key ID. The key-id argument is a case-sensitive string
of 1 to 255 characters, and is usually a vendor-specific string for doing proprietary types of
identification.
Usage guidelines
Only the responder can look up an IKEv2 peer by ID in IKEv2 negotiation. The initiator does not know
the peer ID when initiating the IKEv2 negotiation, so it cannot use an ID for IKEv2 peer lookup.
Examples
# Create an IKEv2 keychain named key1.
<Sysname> system-view
570