Radius Dscp - HP FlexNetwork MSR Series Command Reference Manual

radius dscp

Use radius dscp to change the DSCP priority of RADIUS packets.
Use undo radius dscp to restore the default.
Syntax
radius [ ipv6 ] dscp dscp-value
undo radius [ ipv6 ] dscp
Default
The DSCP priority of RADIUS packets is 0.
Views
System view
Predefined user roles
network-admin
Parameters
ipv6: Specifies the IPv6 RADIUS packets. If you do not specify this keyword, the command sets the
DSCP priority for the IPv4 RADIUS packets.
dscp-value: Specifies the DSCP priority of RADIUS packets, in the range of 0 to 63. A larger value
represents a higher priority.
Usage guidelines
Use this command to set the DSCP priority in the ToS field of RADIUS packets for changing their
transmission priority.
Examples
# Set the DSCP priority of IPv4 RADIUS packets to 10.
<Sysname> system-view
[Sysname] radius dscp 10
radius dynamic-author server
Use radius dynamic-author server to enable the RADIUS DAE server feature and enter RADIUS
DAE server view.
Use undo radius dynamic-author server to disable the RADIUS DAE server feature.
Syntax
radius dynamic-author server
undo radius dynamic-author server
Default
The RADIUS DAE server feature is disabled.
Views
System view
Predefined user roles
network-admin
97