Session Log Flow-End - HP FlexNetwork MSR Series Command Reference Manual

Related commands
session log enable

session log flow-end

Use session log flow-end to enable logging for session deletion.
Use undo session log flow-end to disable logging for session deletion.
Syntax
session log flow-end
undo session log flow-end
Default
Logging for session deletion is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
For the device to output a session log when a session entry is deleted, make sure both session
logging and logging for session deletion are enabled.
Examples
# Enable logging for session deletion.
<Sysname> system-view
[Sysname] session log flow-end
Related commands
session log enable
session log packets-active
Use session log packets-active to set the packet-based threshold for traffic-based logging.
Use undo session log packets-active to restore the default.
Syntax
session log packets-active packets-value
undo session log packets-active
Default
The device does not output session logs based on the packet-based threshold.
Views
System view
Predefined user roles
network-admin
Parameters
packets-value: Specifies the packet-based threshold in the range of 1 to 100000 mega-packets.
756